Our team relies on up to 30 years of experience with radio remote controls for construction applications. The construction crane was one of the first applications and soon after, Remote control for Construction Crane and Machinery from ARCON have counted amongst the leading radio remote controls in the sector. The standard set comes with the TÜV approved RX 26+ now.
The ARCON Remote Control construction crane standard (T-3 and T-5) can be implemented for many crane brands of any manufacturer. The special cable acts as an interface between the standard radio remote control and the crane. Detailed information about the possible crane types can be found in our resource centre in the cable list. This standard impresses today as it did then with impeccable delivery times, easy installation, and economic efficiency.
T-series Radio Remote Controls
Construction crane standard set (HD-6-2) consists of:
- 1 transmitter (T3 or T5)
- 1 receiver (RCV 26+ or RCV MOD)
- 2 batteries
- 1 battery charger
- 1 belly belt
- 1 antenna
ARCON Remote Control has proven useful not only with construction cranes, but also with numerous other applications at construction sites. Even the use at multiple locations, where the carrier frequency may already be occupied by another application, is easily feasible for ARCON safety radio remote controls. Various ARCON frequency management options ensure universal applicability.
Thanks to their robust structure, ARCON safety radio remote controls can be used on construction sites in rough, dirty and dusty environments without having to worry about safety. Our systems are protected against dust and water (IP 65), and come equipped with a breathable GoreTex membrane. Accumulated condensation is transported outwards without any moisture or dust penetrating into the device. The receiver can of course also be installed inside a switch cabinet, complete with a separate antenna.