Wire Rope Cranes and Equipment are used in various industrial application such lifting and moving around heavy materials or objects in a warehouse or factory. During such operations wire rope gets pulled in many directions and more so beyond the allowed rate range by the manufacturers. In order to limit or avoid such situations where the wire ropes gets pulled above the rated angle and range, Angle Limit sensor is used.
Angle Limit Sensor
Angle limit sensor is fixed on to the rope of lifting equipment such as
overhead crane’s wire rope. During the lifting of the load rope angle can
be fixed to certain limit due to which crane operation is safe without causing any damage to the load or equipment itself.
Specially in Overhead Cranes, Container handling Cranes or Industries where large size loads are lifted, These sensor devices are required to prevent the pulling of the load beyond the allowed or rated limit.
These devices can be adjusted and calibrated according to the standards specified by
crane manufactures. These devices have a small display to
that makes it very easy for the user to adjust or calibrate the device as
required.
Angle Limit Sensor can be set to both axis of the crane operation.
DOWNLOAD – Angle Limit Sensor Data Sheet
Benefits of Load Control and Indicator.
1. Indication of maximum rope pull for crane safety.
2. Lifting Cut Off for Safety if the angle of rope is not safe for operation.
3. The installation and load setting procedure can be done easily.
4. Easy Calibration
5. It can also can send out signals to Load Control Units.
Recommended Accessories:
Our sales team is standing by to help you find your way around the many Crane Safety and Measurement options to cater to your specific requirements. The economy, efficiency and safety of your application are top priorities for us!